Chat with us, powered by LiveChat

4 Home Weatherization Myths

/, Energy Efficiency Advice/4 Home Weatherization Myths

4 Home Weatherization Myths

Avoid Home Efficiency Myths to enjoy true comfort and savings

A comfortable family is a happy family!

You might be thinking about home weatherization but where to start? A home performance contractor can help you assess the energy efficiency of your house and provide strategies for increasing it, but there are also DIY resources for the handier types. Whatever direction you take, keep in mind the four myths below and you’ll be sure to save money and create greater comfort and happiness in the long run.

Myth #1: Replace your windows.

This will cost a small fortune and is unnecessary for home weatherization! Whether you have double-pane or single-pane windows, Indow thermal inserts will instantly block drafts and make your home more energy efficient and comfortable. Don’t just save money, save your existing windows.

Myth #2: First weather strip and caulk doors and windows.

This will help stop drafts a bit but won’t get at the real culprits: big leaks are usually in attics, crawlspaces and basements. Read this great Energy Star DIY Guide to sealing and insulating.

Myth #3: Insulate your attic first.

First air seal your attic, then insulate it. Otherwise, air holes in your attic can lead to moisture and mold in your insulation.

Myth #4: Saving energy means sacrificing comfort.

Actually, if you feel comfortable you’re less likely to turn up the thermostat. That’s one reason it’s important to tackle drafty windows in a home weatherization project. A study by Portland State’s Green Building Research Laboratory found that because the interior of an Indow thermal insert is warmer than the inner surface of a pane of glass, a person will feel warmer standing next to an Indow than a single pane of glass – even if the room temperature is the same in both cases.

For more advice on weatherizing, check out this home weatherization website from Energy Star.

>> Check out our videos and case studies for more about Indow thermal window inserts.

 

By |2018-09-20T22:21:33+00:00September 11th, 2014|Blog, Energy Efficiency Advice|0 Comments

About the Author:

Leave A Comment